Parameter
Wire Length |
27 mm - 20,000mm |
Stripping Length Side 1 |
0.1 - 10.0 mm |
Stripping Length Side 2 |
0.1 - 17.0 mm |
Wire Cross Section |
AWG20-AWG32/AWG16-AWG30 |
Cutting Accuracy |
<±(0.5+0.002*L) |
Crimping Force |
2 Ton |
Capacity |
Max. 3,000 PCS/Hour |
Power Supply |
AC220V 50Hz 10A |
Air Pressure |
>0.4Mpa-0.5Mpa |
Weight |
500 kg |
Dimensions (L × W × H) |
950x800x1290 mm |
Advantages
1.The Human-Computer Interaction Interface
Adopting TI (Texas Instruments) high speed DSP processor,we developed user-friendly interface based on the customer’s feedback. The characteristic of the system are: fast response, stable and fault diagnosis.
2.High Precise XY Driver
XY axis, equipped with high-precision linear guide and ball screw, driver by the latest MITSUBISHI
servo motor. Through the innovated control system, the high quality for the ultra thin wire stripping & crimping is guaranteed.
3.The Whole Machine Adopts Nine Japanese Mitsubishi AC Servo
Equipped with 9 pcs latest version of MITSUBISHI servo motor.
Minor transmission clearance, sensitive action, high precision and stable performance are guaranteed.
4.Tool Post Agency
Adopting Japan positive and negative blade module, minor the transmission clearance, high precision cutting. Horizontal & open installation way, easy & clearly for the operation.
5.Terminal Sensor And Peeling Rubber Sensor
The photoelectric sensor fixed with non-contacting way, even the machine worked under fully speed , the sensor can check the stripping process properly and avoid the bending of the wire.
6.Wire Feeding Institutions Without Mechanical Adjustment
Completely different with the existing terminal crimping machine on the market which with mechanical transmission, SEDEKE ACC208 is developed and equipped with the new type of independent descent mechanism and speed-control way, missing & defective crimping for the ultra thin wire are much improved.