The operating specifications of the automatic cutting machine need to include three aspects: preparation before starting the machine, precautions during the cutting process, and maintenance after shutdown. The main contents include: checking the equipment, wearing protective equipment, setting according to process parameters, monitoring the cutting process, handling abnormal situations in a timely manner, and equipment maintenance.

Preparation before starting the machine

1. Safety inspection:
Check whether the cutting machine body and blade are worn, loose or abnormally deformed, and ensure that the protective device is intact. Check whether the power cord is damaged, whether the switches and buttons are sensitive and reliable, and whether the grounding device is firm (to prevent leakage). Add lubricating oil to the guide rails and transmission parts according to the instructions, manually test run the equipment, and observe whether the operation is stable, with no abnormal noise or jamming. Check whether there are obstacles around the equipment to ensure that the safety passage is unobstructed. Check whether the cutting area is clean and free of flammable and explosive items.
2. Personal protection:
Operators need to wear protective glasses, gloves (choose anti-cutting or high-temperature resistant gloves according to the material), and wear non-slip shoes.

3. Material preparation:
Confirm whether the model and specification of the cutting material meet the requirements and place it in the designated location.

Operation process

1. Start the equipment:
Start the equipment according to the correct operation process and perform an idling test to ensure that the equipment operates normally.
2. Parameter setting:
Enter the cutting parameters through the control panel, including: cutting speed, wire feeding speed, cutting depth, and blowing time.

3. Material placement:
Material placement should be stable to avoid displacement or vibration during cutting, which may affect the cutting quality.
4. Timely handling of abnormalities:
If abnormal conditions occur during cutting, such as interruption of cutting, excessive sparks, etc., the equipment should be stopped immediately to find out the cause and eliminate the fault.
5. Fire prevention:
During the cutting process, attention should be paid to preventing fire, especially for the cutting of flammable materials, fire extinguishers should be prepared, and there should be no flammable items around.

Maintenance after shutdown

1. Cleaning equipment:
After cutting, clean the cutting residues, dust, etc. on the equipment in time to keep the equipment clean.
2. Turn off the power:
Turn off the power of the equipment, cut off the gas source, water source, etc. to ensure safety.
3. Inspection and maintenance:
Regularly inspect and maintain the equipment, such as replacing wearing parts, lubricating parts, etc., to ensure the normal operation of the equipment.
4. Record:
Record the parameters, cutting effects and maintenance of each cutting in detail to provide reference for subsequent work.

Other precautions

Non-professionals are not allowed to operate the automatic cutting machine at will.
If the equipment fails, contact professionals for repair in time.
Regular safety training should be carried out to improve the safety awareness of operators.
Strictly abide by relevant safety regulations and systems.
According to the specific equipment model and the operating manual provided by the manufacturer, detailed operations should be carried out.
Safety first, strictly follow the operating specifications to ensure the safe and efficient operation of the equipment.