sales@sedeke.com
Send email for more product information
EN CN
English
English 中文
POSITION: Home > Products > Crimping
SAT-MS6 Applicators
New concept of applicator body made of cast iron casting that supports customization side or front, easy replacement of specific parts by fastening the front of the pieces, broad accessibility and ease for a variety of settings
Share us:
/d/images/products/crimping/sat-ms6-1.jpg
/d/images/products/crimping/sat-ms6-2.jpg
/d/images/products/crimping/sat-ms6-3.jpg
/d/images/products/crimping/sat-ms6-4.jpg
Products List
UniCut EC-6100 Automatic Cutting Machine
EC-920 Automatic Cutting Machine
EC-960H High Speed Cutting Machine
EC-821 Corrugated Tube Cutting Machine
EC822 Corrugated Tube Cutting Machine
UniStrip 2016 Wire Stripping Machine
CS-36R Coaxial Cable Stripping Machine
ACS-9580 Automatic Coaxial Cable Stripping Machine
ACS-9680 Automatic Coaxial Cable Stripping Machine
CS-2486 Coaxial Cable Stripping Machine
CS-4855 Coaxial Cable Stripping Machine
ESC-BX1 Wire Cutting and Stripping Machine
ESC-BX4 Wire Cutting And Stripping Machine
ESC-BX6 Wire Cutting And Stripping Machine
ESC-BX7 Wire Cutting And Stripping Machine
ESC-BX15S Wire Cutting and Stripping Machine
ESC-BX30 Automatic Cutting and Stripping Machine
ESC-BX30S Sheathed Cable Automatic Cutting and Stripping Machine
UniCrimp TM-20 Terminal Crimping Machine
TM-25M Automatic Terminal Crimping Machine
TM-40S Automatic Terminal Crimping Machine
TM-E116 Electrical Terminal Crimping Machine
TM-E120 Pneumatic Type Terminal Crimping Machine
TM-E140 Pre-insulation Tubular Terminal Crimping Machine
SAT-AS6P Applicator
SAT-MS6 Applicators
ACC-208 Fully Automatic Crimping Machine (Both Ends)
ACC-308 Fully Automatic Soldering Machine (Both ends)
ACC-508 Fully Automatic Twisting, Soldering and Crimping Machine
CS-9070 Cable Shield Cutting Machine
FS-9053 Cable Shield Folding Machine
ACS-9100 Cable Shield Processing Machine
ACS-9200 Automatic Cable Shield Processing System
TM-FK40 Terminal Crimping Machine
CS-2486 FAKRA Cable Stripping Machine
STB-50 Automatic Tape Bundling Machine
STB-55 Desktop Bundling Machine
STP-A Hand-held Auto-Taper
STP-C Automatic Wire Taping Machine
STP-H Automatic Wire Taping Machine
PF-03F Automatic Wire Prefeeder
PF-03S Automatic Wire Prefeeder
PF-04 Automatic Wire Prefeeder
PF-06 Automatic Wire Prefeeder
PF-05 Automatic Wire Prefeeder
PF-08 Automatic Wire Prefeeder
CC-33R Cable Coiling Machine
HSM-60 Heat Shrink Tube Processing Machine
PFM-50 Pull Force Measuring Machine
PFM-100 Pull Force Measuring Machine
TSA-120 Terminal Cross Section Analyzer
TSA-120S Terminal Cross Section Analyzer
TSA-80P Terminal Cross Section Analyzer
TCT8-A Cable Tie Tools
TCT8-B Cable Tie Tools
TCT8-C Cable Tie Tools
Hand Crimp Tool
Pneumatic Crimp Tool
Application:
Parameter
Download
Application:
01
For linked terminals, with thickness < 1.2mm., terminal pitch > 27mm.
02
Mechanical Side feed or Rear feed.
03
Wire section between 0 and 10mm².
04
Feeding system for linked terminals on a reel to be unrolled left to right.
05
Can be supplied either with a continuous or a four-pad regulating head.
06
Non-resettable 7-digit cycle counter.
07
Easy replacement of crimpers and anvils.
08
Can be used in both manual and automatic configuration.
Parameter
Feed type Mechanical
Press stroke 40 or 30 mm (1.57“ or 1.18“)
Cross section range 0.08 – 10 mm 2 (28 – 7 AWG)
Crimp height adjustment (wire & insulation) Increment: 0.025 mm (0.001”)
Max.: 2.0 mm
Terminal pitch range Min.: 1 mm (0.04”)
Max.: 28 mm (1.10”)
Terminal thickness < 1,2mm (<0,047"))
Weight 3.9kg (8,6 lbs.)
Base design 3-point base clamp with male T-shaped ram adapter
Important note SEDEKE recommends that wire samples be submitted in cases where there is doubt as to the
processing capabilities of a particular machine.
Download
SAT-MS6 Applicator
Inquiry
If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.
* Company name:
* Email:
Tel:
Address:
* Content: