Computerized wire stripping machines belong to mechanical equipment, and the maintenance measures of mechanical equipment are very important. It is understood that more than 80% of computer wire stripping machines fail due to improper operation and improper maintenance of the machine, causing The fault, let's introduce the maintenance and maintenance method of the computerized wire stripping machine for you!

Computerized stripping machine maintenance measures:
1. Plan the use time of the machine reasonably to prevent the wire stripper from being overloaded. The overload operation of the wire stripping machine will cause the greatest damage to the machine, so the use of the machine should be arranged according to the scope of use and the time of use in the manual.
2. After each use of the wire stripper, it is necessary to develop the habit of maintaining the machine. Wipe the feeding roller, blade, and wire guide with a dry cloth to remove dust, wire scraps, and oil stains.Not only insist on the cleanliness of machinery and equipment, but also insist on the cleanliness of machine workbench, which can not only provide a good working environment, but also help maximize the use of machinery and improve the service life of machinery and equipment.
3. It is necessary to follow the usage range of the instruction manual of the computer wire stripping machine, and should not exceed the corresponding range, so as not to damage the machine or even cause other situations to occur.

Maintenance method of computerized wire stripping machine:
1. Apply lubricating oil to the moving parts (e.g., gears, bearings, feeding roller shafts) to reduce friction.
2. If you need to replace the blade of the wire stripper, you should turn off the power first, then remove the blade holder, and pay attention to tightening the screws when replacing.
3. Tighten loose screws, nuts, and bolts (especially those fixing the blade and feeding mechanism) to prevent vibration damage.
4. Regularly clean the dirt on the incoming and outgoing pulleys to ensure the quality of the stripping effect. If the stripping length is different, there may be dirt on the wheels and the wheels will slip. At this time, cleaning is required.

The above is about the protection measures and maintenance methods of the computer wire stripping machine. The machine also has a lifespan, and the good lifespan of the protection will be longer, and the benefits will only increase, so I hope everyone is in the process of using it. It can also protect the computer wire stripping machine very well. If your machine has failed and the problem continues to be dealt with, you can contact us at any time.